BS EN IEC 63056:2020 pdf free
BS EN IEC 63056:2020 pdf free.Secondary cells and batteries containing alkaline or other non-acid electrolytes一Safety requirements for secondary lithium cells and batteries for use in electrical energy storage systems.
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
IEC 60050-482. International Electrotechnical Vocabulary (1EV) — Part 482: Primary and secondary cells and batteries (available at http:I/www.electropedia.org/)
IEC 60695-10-2, Fire hazard testing — Part 10-2: Abnormal heat — Ball pressure test method
IEC 60695-11-10. Fire hazard testing — Part 11-10: Test flames — 50 W horizontal and vertical flame test methods
IEC 60950-1:2005. Information technology equipment — Safety — Part 1: General requirements
IEC 62619, Secondary cells and batteries containing alkaline or other non-acid electrolytes — Safety requirements for secondary lithium cells and batteries, for use in industrial applications
IEC 62620:2014, Secondary cells and batteries containing alkaline or other non-acid electrolytes — Secondary lithium cells and batteries for use in industrial applications
lSO/IEC Guide 51, Safety aspects — Guidelines for their inclusion in standards
3 Terms and definitions
For the purposes of this document, the terms and definitions given in IEC 60050-482, ISO/IEC Guide 51, and the following apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
• IEC Electropedia: available at http://www.electropedia.orgl
• ISO Online browsing platform: available at http://www.iso.org/obp
3.1 safety freedom from unacceptable risk
3.2 risk combination of the probability of occurrence of harm and the severity of that harm
3.3 harm physical injury or damage to the health of people or damage to property or to the environment
3.4 hazard potential source of harm
3.5 intended use use of a product, process or service in accordance with specifications, instructions and information provided by the supplier
3.7 secondary lithium cell secondary cell where electrical energy is derived from the insertion/extraction reactions of lithium ions or oxidation/reduction reaction of lithium between the negative electrode and the positive electrode
Note 1 to entry: The cell typically has an electrolyte that consists of a lithium salt and organic solvent compound in liquid, gel or solid form and has a metal or a laminate film casing. It is not ready for use in an application because it is not yet ftted with its final housing, terminal arrangement and electronic control device.
3.8 cell block group of cells connected together in parallel configuration with or without protective devices (e.g. fuse or positive temperature coefficient device) and monitoring circuitry
Note 1 to entry: It is not ready for use in an application because it is not yet ftted with its final housing, terminal arrangement and electronic control device.
3.9 module group of cells connected together in a series and/or parallel configuration with or without protective devices (e.g. fuse or positive temperature coefficient device) and monitoring circuitry battery pack energy storage device which comprises one or more cells or modules electrically connected and has monitoring circuitry which provides information (e.g. cell voltage) to a battery system to influence the battery’s safety, performance and/or service life
Note 1 to entry: It may incorporate a protective housing and be provided with terminals or other interconnection arrangement.
battery system battery system which comprises one or more cells, modules or battery packs and has a battery management system capable of controlling current in case of overcharge, overcurrent,overdischarge, and overheating.BS EN IEC 63056 pdf download.
