Home>IEC standards>EN IEC 62275-2019 pdf free

EN IEC 62275-2019 pdf free

EN IEC 62275-2019 pdf free.Cable management systems – Cable ties for electrical installations (IEC 62275:2018).
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
IEC 60068-2-6:2007, Environmental testing — Part 2-6: Tests — Test Fc: Vibration (sinusoidal)
IEC 60695-11-5:2016, Fire hazard testing — Part 11-5: Test flames — Needle-flame test method — Apparatus, confirmatory test arrangement and guidance
IEC 60216-4-1:2006, Electrical insulating materials — Thermal endurance properties — Part 4-1: Ageing ovens — Single-chamber ovens
ISO 4892-2:2013, Plastics — Methods of exposure to laboratory light sources — Part 2:
Xenon-arc lamps
ISO 9227:20 17, Corrosion tests in artificial atmospheres — Salt spray tests
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
• IEC Electropedia: available at http:llwww.electropedia.orgl
• ISO Online browsing platform: available at http://www.iso.org/obp
4 General requirements
A cable tie and a fixing device shall withstand the stresses likely to occur during recommended installation practice and perform under the conditions of classifications in Clause 6 as declared by the manufacturer.
Compliance is checked by carrying out all the appropriate specified tests.
NOTE Annex A details the compliance checks to be carried out for cable ties and fixing devices currently complying with IEC 62275:2013 In order to comply with this edition 3.
5 General notes on tests
5.1 Tests according to this document are type tests. Unless otherwise specified, tests are carried out with the cable ties and their associated fixing devices, where available, installed as in normal use according to the manufacturer’s instructions.
Unless otherwise specified, requirements and tests for fixing devices also apply to adhesive fixing devices.
NOTE For guidance in determining product types and sample sets, a family of cable ties or fixing devices having material, construction characteristics, and classifications according to Clause 6. in common, are considered of the same product type. Examples for consideration are identical generic material description, material colours, or variable lengths of a cable tie of otherwise similar construction. The sample sets selected for testing from each product type is representative of the extremes of the range (example: shortest and longest), and the minimum performance level obtained for either extreme is determined to be representative of the entire range.
Consideration is given to minor construction variations that can be determined by inspection to have no effect on performance, when determining product types.
5.2 Unless otherwise specified, tests on non-metallic and composite components shall
commence when the samples have been removed from their packaging and then stabilized at a temperature of (23 ± 5) °C and at a relative humidity of (50 t 5) %, for a period as indicated in Table 1.EN IEC 62275 pdf free download.

Related PowerPoint Templates

Template Categories