IEC 60799-2018 pdf download

IEC 60799-2018 pdf download.Electrical accessories – Cord sets and interconnection cord sets.
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
IEC TR 60083, Plugs and socket-outlets for domestic and similar general use standardized in member countries of IEC
IEC 60227 (all parts), Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V
IEC 60245 (all parts), Rubber insulated cables — Rated voltages up to and including 450/750 V
IEC 60320-1, Appliance couplers for household and similar general purposes — Part 1:General requirements
IEC 60320-2-3, Appliance coupler for household and similar general purposes — Part 2-3: Appliance coupler with a degree of protection higher than IPXO
IEC 60884-1. Plugs and socket-outlets for household and similar purposes — Part 1: General requirements
IEC 61140, Protection against electric shock — Common aspects for installation and equipment
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
• IEC Electropedia: available at http://www.electropedia.org/
• ISO Online browsing platform: available at http:/iwwwisoorglobp
4 General requirements
Cord sets and interconnection cord sets shall be so designed and constructed that in normal use their performance is reliable and without danger to the user or surroundings.
Tests shall be made to prove compliance with the requirements laid down in this document, where applicable.
Tests are as follows:
• type tests are made on representative samples of each cord set and interconnection cord set;
• routine tests are made on each cord set and interconnection cord set manufactured to this document, where applicable.
5 Requirements
5.1 Requirements for component parts
The plug of a cord set shall comply with the requirements of IEC 60884-1.
The connector of a cord set or an interconnection cord set shall comply with the requirements of IEC 60320-1.
The plug connector of an interconnection cord set shall comply with the requirements of
IEC 60320-1.
The connector, with a degree of protection higher than IPXO, of a cord set or an interconnection cord set shall comply with the requirements of IEC 60320-2-3.
The plug connector, with a degree of protection higher than IPXO, of an interconnection cord set shall comply with the requirements of IEC 60320-2-3.
The cord of a cord set or interconnection cord set shall comply with the requirements of relevant IEC standards.
Compliance with the requirements for plugs, connectors, plug connectors and cords is checked by the tests specified in the relevant standards. During the test of one component. the influence on the other components of the assembly is ignored.
5.2 Requirements for the assembly
5.2.1 Rated voltage
The rated voltage of the connector and the cord shall be not less than the rated voltage of the plug. For interconnection cord sets, the rated voltage of the connector and the plug connector shall be the same.
5.2.2 Rated current
The rated current of the plug or plug connector shall be not less than the rated current of the connector.IEC 60799 pdf download.