IEC 60974-10-2020 pdf free

IEC 60974-10-2020 pdf free.Arc welding equipment – Part 10: Electromagnetic compatibillity (EMC) requirements.
The radiated emission requirements in this document are not intended to be applicable to the intentional transmissions from a radio transmitter as defined by the ITU nor to any spurious emissions related to these intentional transmitters.
This document specifies
a) applicable standards and test methods for radio-frequency (RF) emissions;
b) applicable standards and test methods for harmonic current emission, voltage fluctuations and flicker;
C) immunity requirements and test methods for continuous and transient, conducted and radiated disturbances including electrostatic discharges;
d) additional requirements for equipment powered by internal or external batteries (Annex D);
e) additional requirements for equipment containing radio frequency transmitters/receivers (Annex E).
Arc welding equipment type tested in accordance with, and which has met the requirements set in, this document is considered to be in compliance for all applications.
2 NormatIve references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
IEC 60974-1:2017, Arc welding equipment — Part 1: Welding power sources IEC 60974-1:2017/AMD1:2019
IEC 60974-6:2015. Arc welding equipment — Part 6: Limited duty equipment
IEC 61000-3-2:2018, Electromagnetic compatibility (EMC) — Part 3-2: Limits — Limits for harmonic current emissions (equipment input current < 16 A per phase)
IEC 61000-3-3:2013, Electromagnetic compatibility (EMC) — Part 3-3: Limits — Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current < 16 A per phase and not subject to conditional connection
IEC 61000-3-3:2O13IAMD1:2017
IEC 61000-3-11:2017, Electromagnetic compatibility (EMC) — Part 3-11: Limits — Limitation of voltage changes. voltage fluctuations and flicker in public low-voltage supply systems — Equipment with rated current <75 A and subject to conditional connection
IEC 61000-3-12:2011, Electromagnetic compatibility (EMC) — Part 3-12: Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current> 16A and<75A per phase
IEC 61000-4-2:2008, Electromagnetic compatibility (EMC) — Part 4-2: Testing and measurement techniques — Electrostatic discharge immunity test
IEC 61000-4-3:2006, Electromagnetic compatibility (EMC) — Part 4-3: Testing and
measurement techniques — Radiated, radio-frequency, electromagnetic field immunity test
IEC 61000-4-3:2006/AMDI :2007
IEC 61000-4-3:20061AMD2:2010
IEC 61000-4-4:2012, Electromagnetic compatibility (EMC) — Part 4-4: Testing and measurement techniques — Electrical fast transient/burst immunity test
IEC 61000-4-5:2014, Electromagnetic compatibility (EMC) — Part 4-5: Testing and measurement techniques — Surge immunity test
IEC 61000-4-5:2014/AMD1:2017
IEC 61000-4-6:2013. Electromagnetic compatibility (EMC) — Part 4-6: Testing and measurement techniques — 1mm unity to conducted disturbances, induced by radio-frequency fields
IEC 61000-4-11:2004, Electromagnetic compatibility (EMC) — Part 4-11: Testing and measurement techniques — Voltage dips, short interruptions and voltage variations immunity tests
IEC 61000-4-11:2004/AMD1:2017
IEC 61000-4-34:2005, Electromagnetic compatibility (EMC) — Part 4-34: Testing and measurement techniques — Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current more than 16 A per phase
IEC 61000-4-34:2005/AMD1 :2009.IEC 60974-10 pdf free download.