IEC 61000-3-2-2020 pdf free
IEC 61000-3-2-2020 pdf free.Electromagnetic compatibility (EMC) – Part 3-2: Limits – Limits for harmonic current emissions (equipment input current S16 A per phase).
Arc welding equipment, which is not professional equipment, with a rated input current up to and including 16 A per phase, is included in the scope of this document. All other arc welding equipment is excluded from the scope of this document: however, the harmonics emission can be evaluated using IEC 6 1000-3-12 and relevant installation restrictions.
The tests according to this document are type tests.
For systems with nominal voltages less than but not equal to 220 V (line-to-neutral), the limits have not yet been considered.
NOTE The words apparatus, appliance, device and equipment are used throughout this document. They have the same meaning for the purposes of this document.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
IEC 60050-161:1990, International Electrotechnical Vocabulary (1EV) — Part 161:
Electromagnetic compatibility (available at www.electropedia.org)
IEC 60107-1:1997. Methods of measurement on receivers for television broadcast transmissions — Part 1: General considerations — Measurements at radio and video frequencies
IEC 60155:1993, Glow-starters for fluorescent lamps
IEC 60268-1:1985, Sound system equipment — Part 1: General
IEC 60268-1:19851AMD1:1988
IEC 60268-1:1985/AMD2:1988
IEC 60268-3:2018, Sound system equipment — Part 3: Amplifiers
IEC 60335-2-2:2019. Household and similar electrical appliances — Safety — Part 2-2:
Particular requirements for vacuum cleaners and water-suction cleaning appliances
IEC 60335-2-14:2016, Household and similar electrical appliances — Safety — Part 2-14:
Particular requirements for kitchen machines
IEC 60335-2-24:2010, Household and similar electrical appliances — Safety — Part 2-24:
Particular requirements for refrigerating appliances, ice-cream appliances and ice makers
IEC 60335-2-24:2010/AMD1:2012
IEC 60335-2-24:2010/AMD2:2017
IEC 60335-2-79:2016, Household and similar electrical appliances — Safety — Part 2-79:
Particular requirements for high pressure cleaners and steam cleaners
IEC 60598-2-17:2012. Luminaires — Part 2-17: Particular requirements — Luminaires for stage lighting, television and film studios (outdoor and indoor)
IEC 60598-2-17:2O12IAMD1:2015
IEC 60974-1:2017, Arc welding equipment — Part 1: Welding power sources
IEC 61000-4-7:2002, Electromagnetic compatibility (EMC) — Part 4-7: Testing and measurement techniques — General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto
IEC 61000-4-7:20021AM01 :2008
IEC 62756-1:2015, Digital load side transmission lighting control (DLT) — Part 1: Basic requirements
3 Terms and definitions
For the purposes of this document, the terms and definitions given in IEC 60050-161 and the following apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
• IEC Electropedia: available at http:llwwwelectropedia.orgl
• ISO Online browsing platform: available at http://www.iso.org/obp.IEC 61000-3-2 pdf free download.
