IEC 61000-6-3-2020 pdf free
IEC 61000-6-3-2020 pdf free.Electromagnetic compatibility (EMC) – Part 6-3: Generic standards – Emission standard for equipment in residential environments.
The intention is that all equipment used in the residential, commercial and light-industrial environments are covered by IEC 61000-6-3 or IEC 61 000-6-8. If there is any doubt the requirements in IEC 61000-6-3 apply.
The conducted and radiated emission requirements in the frequency range up to 400 GHz are considered essential and have been selected to provide an adequate level of protection of radio reception in the defined electromagnetic environment. Not all disturbance phenomena have been included for testing purposes but only those considered relevant for the equipment intended to operate within the locations included within this document.
The emission requirements in this document are not intended to be applicable to the intentional transmissions and their harmonics from a radio transmitter as defined by the ITU.
NOTE I Safety considerations are not covered by this document.
NOTE 2 In special cases, situations will artse where the levels specified in this document will not offer adequate protection; for example where a sensitive receiver is used in close proximity to an equipment. In these instances, special mitigation measures can be employed.
NOTE 3 Disturbances generated in fault conditions of equipment are not covered by this document.
NOTE 4 As the requirements In this document are more stringent or equivalent to those requirements in IEC 61000-
6-4 and IEC 61000-6-8, equipment fulfilling the requirements of this document comply with the requirements of
IEC 61000-6-4 and IEC 61000-6-8.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
IEC 61000-3-2:2018. Electromagnetic compatibility (EMC) — Part 3-2: Limits — Limits for harmonic current emissions (equipment input current S 16 A per phase)
IEC 61000-3-3:2013. Electromagnetic compatibility (EMC) — Part 3-3: Limits — Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems. for equipment with rated current < 16 A per phase and not subject to conditional connection
IEC 61000-3-3:2013/AMD1:2017
3 Terms, definitions and abbreviated terms
3.1 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
• IEC Electropedia: available at http:!Iwww.electropedia.org!
• ISO Online browsing platform: available at http://www.iso.org/obp.IEC 61000-6-3 pdf free download.
