IEC 61084-1-2017 pdf free
IEC 61084-1-2017 pdf free.Cable trunking systems and cable ducting systems for electrical installations – Part 1: General requirements.
This part of the IEC 61084 series specifies requirements and tests for cable trunking systems (CTS) and cable ducting systems (CDS) intended for the accommodation, and where necessary for the electrically protective separation, of insulated conductors, cables and possibly other electrical equipment in electrical and/or communication systems installations. The maximum voltage of these installations is 1 000 V AC and 1 500 V DC.
This document does not apply to conduit systems, cable tray systems, cable ladder systems,
power track systems or equipment covered by other standards.
NOTE This part ot the IEC 61084 serIes is not nIended to be used by itselt
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (Including any amendments) applies.
IEC 60417, Graphical symbols for use on equipment
IEC 60423:2007, Conduit systems for cable management — Outside diameters of conduits for electrical installations and threads for conduits and fittings
IEC 60529:1 989, Degrees of protection provided by enclosures (IP Code)
IEC 60529:1 989/AMD1 :1999
IEC 60529:1989/AMD2:2013
IEC 60695-2-11:2014, Fire hazard testing — Part 2-Il: Glowing/hot-wire based test methods — Glow-wire flammability test method for end-products (GWEPT)
IEC 60695-11-2:201 3, Fire hazard testing — Part 11-2: Test flames — 1 kWpre-mixed flame — Apparatus, confirmatory test arrangement and guidance
IEC 61032:1997, Protection of persons and equipment by enclosures — Probes for verification
ISO 2768-1:1989, General tolerances — Part 1:Tolerances for linear and angular dimensions without individual tolerance indications
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
• IEC Electropedia: available at http://www.electropedia.org/
• ISO Online browsing platform: available at http://www.iso.org/obp
3.1 cable trunking system CTS assembly comprising a trunking length and possibly other system components to provide an enclosure for the accommodation and laying in of insulated conductors and cables and possibly the accommodation of other electrical equipment
Note 1 to entry: Different types of CTS are shown in Figure 1 and explained in Annex A.
3.2 cable ducting system cos
assembly comprising a ducting length and possibly other system components to provide an enclosure for the accommodation and drawing in of insulated conductors and cables and possibly the accommodation of other electrical equipment
Note 1 to entry: Different types of CDS are shown in Figure 1 and explained in Annex A.
3.3 system component
part of the system which includes:
a) trunking length or ducting length;
b) trunking fitting or ducting fitting;
c) fixing device;
d) apparatus mounting device;
e) system accessory
Note 1 to entry: A system does not necessarily include all system components a) to e). Different combinations of system components can be used.
3.4 trunking length
main component of a cable trunking system comprising a base with one or more access covers which may be opened or removed.IEC 61084-1 pdf free download.
