Home>IEC standards>IEC 62275-2018 pdf free

IEC 62275-2018 pdf free

IEC 62275-2018 pdf free.Cable management systems – Cable ties for electrical installations.
The following documents are referred to in the text in such a way that some or all of theircontent constitutes requirements of this document. For dated references, only the editioncited applies. For undated references, the latest edition of the referenced document (includingany amendments) applies.
IEC 60068-2-6:2007,Environmental testing – Part 2-6:Tests – Test Fc: Vibration(sinusoidal)
IEC 60695-11-5:2016,Fire hazard testing – Part 11-5: Test flames – Needle-flame testmethod – Apparatus, confirmatory test arrangement and guidance
IEC 60216-4-1:2006,Electrical insulating materials – Thermal endurance properties -Part 4-1 : Ageing ovens -Single-chamber ovens
ISO 4892-2:2013,Plastics – Methods of exposure to laboratory light sources – Part 2:Xenon-arc lamps
Iso 9227:2017,Corrosion tests in artificial atmospheres – Salt spray tests
Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and lEC maintain terminological databases for use in standardization at the followingaddresses:
·IEC Electropedia: available at http://www.electropedia.org/
·ISO Online browsing platform: available at http://www.iso.org/obp
3.1 cable tie
band or length of material, employing a locking device,used for bundling or tying groups ofcables together, securing and/or supporting the cables
Note 1 to entry: Type 1 and Type 2 cable ties are classified in 6.2.2 and 6.2.3.
Note 2 to entry: In some countries,such as Canada and the United States,additional Type classifications areapplicable when prequalified moulding materials are used.See UL 62275/CSA C22.2 No. 62275.
3.2 fixing device
component(such as a block or bracket) specifically designed to secure the cable tie to amounting surface
3.3 metallic component
component that consists of metal only
Note 1 to entry: A metallic cable tie having a thin non-metallic or organic coating, where the coating does notcontribute to the determination of the loop tensile strength, is considered a metallic component
Note 2 to entry: In case of doubt, ” as-received condition” tests with and without coating can be carried out.3.4
non-metallic component
component that consists of non-metallic material only
3.5 composite component
component comprising both metallic and non-metallic materials where both metallic and non-metallic materials contribute to the determination of the loop tensile strength
3.6 environmental influence
effect of corrosive substances or solar radiation, etc.IEC 62275 pdf download.

Related PowerPoint Templates

Template Categories