IEC 62387-2012 pdf free

IEC 62387-2012 pdf free.Radiation protection instrumentation – Passive integrating dosimetry systems for personal and environmental monitoring of photon and beta radiation.
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
IEC 61000-4-2, Electromagnetic compatibility (EMC) — Part 4-2: Testing and measurement techniques — Electrostatic discharge immunity test
IEC 61000-4-3, Electromagnetic compatibility (EMC) — Part 4-3: Testing and measurement techniques — Radiated, radio-frequency, electromagnetic field immunity test
IEC 61000-4-4. Electromagnetic compatibility (EMC) — Part 4-4: Testing and measurement techniques — Electrical fast transient/burst immunity test
IEC 61000-4-5. Electromagnetic compatibility (EMC) — Part 4-5: Testing and measurement techniques — Surge immunity test
IEC 61000-4-6, Electromagnetic compatibility (EMC) — Part 4-6: Testing and measurement techniques — Immunity to conducted disturbances, induced by radio-frequency fields
IEC 61000-4-8. Electromagnetic compatibility (EMC) — Part 4-8: Testing and measurement techniques — Power frequency magnetic field immunity test
IEC 61000-4-11, Electromagnetic compatibility (EMC) — Part 4-11: Testing and measurement techniques — Voltage dips, short interruptions and voltage variations immunity tests
lEG 61000-6-2, Electromagnetic compatibility (EMC) — Part 6-2: Generic standards — Immunity for industrial environments
ISO 4037 (all parts), X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy
ISO 4037-3:1999, X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy — Part 3: Calibration of area and personal dosemeters and the measurement of their response as a function of energy and angle of incidence
ISO 6980 (all parts), Nuclear energy — Reference beta-particle radiation
ISO 6980-3, Nuclear energy — Reference beta-particle radiation — Part 3: Calibration of area and personal dosemeters and the determination of their response as a function of beta radiation energy and angle of incidence
ISO 8529 (all parts), Reference neutron radiations
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
NOTE The terms are listed in alphabetical order.
3.1 ambient dose equivalent H*(d) at a point in a radiation field, dose equivalent that would be produced by the corresponding expanded and aligned field, in the ICRU sphere at a depth, d, on the radius opposing the direction of the aligned field
Note 1 to entry: The recommended depth, d, for environmental monitoring in terms of H*(d) is 10 mm, and H*(d) may be written as H*(10). (IEV 393-14-95] 1
[SOURCE: ICRU 51:1993, modified – Note 1 to entry has been added].IEC 62387 pdf download.