IEC 62608-2-2017 pdf free
IEC 62608-2-2017 pdf free.Multimedia home network configuration – Basic reference model Part 2: Operational model.
This document specifies the operational model for home network configuration.
In the home network, various CE devices that have distinctive functions are connected on a shared network. However, there is no manager in the home network. Thus, a standardized network management procedure is required for suitable network operation.
This document specifies the management procedure as sequences. The sequences are typical procedures of management. This document also describes implementation requirements, and the protocols between each component.
2 Normative references
There are no normative references in this document.
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
• IEC Electropedia: available at http:/Iwww.electropedia.org/
• ISO Online browsing platform: available at http:I/www.iso.org/obp
home network network that connects equipment to be configured in the model; the network is built mainly in a home
3.2 home gateway equipment that relays communication from target equipment to the outside of the home network
3.3 conflgu rator entity that configures equipment.
3.4 configured agent entity that sends configuration information to the configurator.
3.5 cloud server server that collaborates with the configurator to accomplish the required function located outside of the home
Note 1 to entry: Cloud servers include a service server, a quality check server, a service failure information server and a diagnosis server.
4 Sequences
4.1 General This document defines basic sequences based on IEC 62608-1. Detailed use cases and sequences are addressed under TTC TR-1062.
The configurator serves to configure the IP network environment when device applications need to use the IP network. Clause 4 describes configurator use cases and sequences.
4.2 Sequence 1: new device connection
Sequence 1 shown in Figure 1 is the IP network configuration when new device is connected to the home network. This sequence is 1-l.A in TTC TR-1062:2016.
Actors:
• CE: consumer electronics device,
• HG: home gateway,
• configurator,
• service server (equipment and configuration management server).IEC 62608-2 pdf download.
