IEC 62941-2019 pdf free
IEC 62941-2019 pdf free.Terrestrial photovoltaic (PV) modules – Quality system for PV module manufacturing.
The object of this document is to provide a framework for the improved confidence in the ongoing consistency of performance and reliability of certified PV modules. The requirements of this document are defined with the assumption that the quality management system of the organization has already fulfilled the requirements of ISO 9001 or equivalent quality management system. This document is not intended to replace or remove any requirements of 1S09001 or equivalent quality management system. By maintaining a manufacturing system in accordance with this document. PV modules are expected to maintain their performance as determined from the test sequences in IEC 61215 series. IEC 62108, or IEC 61730.
This document is applicable to all PV modules independent of design and technology, i.e. flat panel, concentrator photovoltaic (CPV). Quality controls for CPV and nonconventional flat- plate manufacturing will differ somewhat from those of more conventional designs; this document has not considered these differences.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
IEC 60812: Failure modes and effects analysis (FMEA and FMECA)
IEC 60891, Photovoltaic devices — Procedure for temperature and irradiance corrections to measured I-V characteristics
IEC 60904-1, Photovoltaic devices — Part 1: Measurement of photovoltaic current-voltage characteristics
IEC 60904-2, Photovoltaic devices — Part 2: Requirements for photovoltaic reference devices
IEC 60904-3. Photovoltaic devices — Part 3: Measurement principles for terrestrial photovoltaic (PV) solar devices with reference spectral irradiance data
IEC 60904-4. Photovoltaic devices — Part 4: Reference solar devices — Procedures for establishing calibration traceability
3 Terms, definitions and abbreviated terms
For the purposes of this document, the terms and definitions given in IEC TS 61836 and the following apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
• IEC Electropedia: available at http://wwwelectropedia.orgl
• ISO Online browsing platform: available at http://www.iso.orglobp
3.1 containment action taken to protect the customer from the effect of a harmful situation
Note 1 to entry: Containment may Include correcting an existing situation or adding additional screening or retesting
3.2 control plan documented description of the systems and processes, and controls required for maintaining the product and process quality as well as reaction to non-conformance
3.3 customer end user, investor, installer who purchases modules from the organization for their own use
3.4 design lifetime design target period during which PV modules are expected to safely satisfy the specified performance under the specified conditions
Note 1 to entry: Specified conditions include application of use, installation environment configurations and operation conditions of the PV module in use. The design targel period is set considering changes in performance of PV modules due to aging degradation of parts and materials used in the stated environment
3.5 Design Failure Mode and Effects Analysis DFMEA application of the Failure Mode and Effects Analysis (FMEA) method specifically to design activities related to the product/service
3.6 Define, Measure, Analyse, Improve, Control DMAIC data-driven quality strategy for improving processes and an integral part of a Six Sigma quality initiative
3.7 Electrostatic discharge ESD transfer of electric charge between bodies of different electric potential in proximity or through direct contact.IEC 62941 pdf free download.
